How to glue the middle of a flower from plastic bottles. Do-it-yourself flowers from plastic bottles: cornflowers, roses and clivia. DIY plastic bottle flowers step by step for beginners

The trend of rational use of household waste has recently become more and more popular, especially for plastic containers. From plastic bottles, you can do with your own hands almost the entire country interior and more. One of the main advantages of this material is its long service life, besides it is very elastic. Do not forget that plastic bottles are an affordable material that every owner or hostess always has in stock.

Cheap and cheerful - we make flower beds from bottles

Plastic containers are ideal for as they have a great advantage over wood and even metal. Wooden fencing on flower beds or flower beds cracks or rots over time under the influence of moisture and the sun. Even metal curbs are susceptible to corrosion and require periodic maintenance, such as regular painting.

But what about plastic? It does not lose its shape and does not collapse for a long time. This means that such a flower bed will last more than one season and even more than one year, moreover, it does not require any maintenance at all. Even if a “breakage” occurs, the desired “element” can always be found in the pantry and easily replaced without resorting to long tedious shopping trips in order to find a suitable fragment.

So, what can you do with plastic bottles with your own hands?

bottle borders

If you need to protect the flower garden, plastic containers of different sizes will do just fine. This will not only limit the space and prevent the growth of perennials, but will also retain moisture and prevent the emergence of weeds.

The shape and size of the flower bed depend only on the imagination of the summer resident: it can be either equilateral or in the form of some animal or plant. Also, bottles can be divided into segments of the flower bed itself.

Even a child can build a bottle border (with the help of adults, of course):

1. First of all, on the site, you should draw with a sharp object or pour the contours of the flower bed with sand.
2. Release the bottles from the labels, wash them, pour sand into them and tighten the cap. If this is not available, ordinary earth or water can be used. This is necessary for stability, since empty containers will quickly fall out of the fence.
3. Dig a groove along the outlined contour so that the bottle can be deepened by about 1/3 into it.
4. Place the filled bottles in the groove with the neck down, as close as possible to each other, and cover with earth.

For a visual effect, you can use bottles of different colors of plastic (green, white, brown).

Some summer residents do without digging in bottles. For example, bottles without a bottom are simply inserted into each other, forming a circle. The finished design can be "put on" or taken into the ring near the trunk circle of the tree. To fix the curb, it must be firmly pressed to the ground with arcs.

Multi-tiered flower bed

If you really want to have a flower garden, and there is a catastrophic lack of space, you can do it yourself from plastic bottles. The principle is the same as for the construction of the curb, only after laying the first tier, it is necessary to fill it with nutrient soil, and only then lay out the next floor.

When planting plants for the lower tier, it is better to choose moisture-loving specimens, since water will flow down when watering.

Mini flower beds

Beautiful and useful crafts for giving can be made from 5-liter plastic bottles. They will serve as miniature and cute flower beds, for example, in the shape of everyone's favorite piglets.

Group compositions in the form of trains with flowers look no less impressive.

And if you sow lawn grass instead of flowers, a large bottle turns into a cute hedgehog with green spines. It remains only to attach the eyes and nose.

Those who are not afraid of small rodents will like cute mice from small (liter) bottles. They are good for planting petunias.

Flower pots and flowerpots

With a little imagination, plastic bottles can be easily transformed into small decorative pots for flowers or spicy greens. You can make them even or cut them into a marker in the shape of a muzzle. Such flowerpots will look great not only in the garden gazebo, but also in the house on the windowsill.

But if you put a fabric cover on a cropped bottle and attach ropes, you will get elegant planters for a summer veranda.

The easiest way to make hanging pots is to cut out fragments of the walls on both sides of the bottle, and fasten a string for hanging under the neck. In such flowerpots, compact undersized plants can be planted.

Making a beautiful garden path

Tracks made of plastic containers are especially popular with summer residents. The strength of such a path depends on the laying method and what part of the plastic container serves as a building material:

Paths made of plastic bottles become very slippery in winter.

Fun playground - decorate a place for children's games

Caring parents always strive to give their children a place to play in the country, where children can pass the time while adults are busy in the garden. Of course, it should be not only safe, but also colorful to please the kids. With the help of plastic bottles, it is easy to decorate the playground by making a variety of plants and animals. Ordinary paint will help to give them brightness.

In the shade under a palm tree

What is a playground without a sandbox? And where there is sand, a palm tree must “grow”. For a Tropican, you will need green and brown bottles for the trunk and leaves, respectively.

Before proceeding with the assembly, you need to take care of a solid base. For example, fix a metal pin in a concrete screed, and it should be quite long so that the tree turns out high, and children can walk freely under it.

When the base is fixed, you can start "growing" palm trees:

• cut off half of the bottle (the top with the neck is not needed) and form a jagged edge;
• make a hole in the center of the bottom, string the blanks onto the base pin, while bending the teeth to the side for a more natural look;
• cut off the bottom of the green bottle and make straight cuts along the entire contour to the point where the wall goes into the neck (if desired, the branches can be made curly - cut into 4 parts and place cloves on each);
• string fragments of the branch on the base;
• firmly attach the finished branches to the top of the stem (by welding or construction harnesses).

If after assembling the palm tree there are still many green bottles left, you can make a small (or large) Christmas tree from them. Remove the bottom from the bottle and cut it into long narrow strips right up to the very neck. Trim the edges of the strips to look like thorns. Thread the leaves onto the base.

Such a Christmas tree will look great on the site in winter, especially under snow, and will also help out on New Year's Eve those who, in a hurry, did not have time to buy a living tree.

Guests from a fairy tale - funny animals

And of course, there must be toys. Often children take their old pets outside. With the help of plastic bottles, you can easily diversify the "zoo", creating real masterpieces - from the fabulous Frog Princess and the Golden Fish to modern cartoon characters.

Take at least a handsome cat, painted in black and white paint. And you can use brown beer bottles, and you get a brown cat, also beautiful.

From the two bottoms of the bottle, form a head (connect them), while the bends on the bottoms will really look like a real head. On one of them, draw eyes, eyebrows and mustaches with white paint, and a neat tongue with red paint. From above, insert cut out small ears. For the body, string the same short cut bottoms onto the base, close the body last. Melt the edges of the bottoms. Walk along the melted contour of the ears and fragments of the body with white paint, and on the front bottom make a white speck on the breast.

Glue the head and legs - the upper parts from bottles with an elongated neck will come in handy for them. Cut them off to the place where the bottle expands, cut the edges with sharp teeth and build legs from 4-5 parts, putting them on the base wire. Screw the corks onto the upper necks, glue the paws to the body with them. For the tail, take a long wire and string the narrowest parts of the neck onto it, but without plugs. To make the tail fluffy, cut the edges into thin strips.

Beautiful animals are also obtained from large 5-liter containers. With the right combination of bottles of different sizes and with the help of bright coloring, you can place a zebra, a horse, a cow, a donkey and even a giraffe on the site.

Flowers for my daughter

In the sandbox, children not only sculpt Easter cakes. Little girls are very fond of flowers and often pick dandelions on the lawn (or in their mother's flower bed) to plant in their sand garden. But you can make a whole greenhouse of flowers out of bottles, while the girls will be happy to take part in the manufacture of the simplest options. Daisies, cornflowers and tulips will decorate the sandbox, especially since young flower growers will be able to repeatedly "transplant" them from garden to garden without harm to plants and mother's nerves.

For flowers you will need:

• stem wire;
• flat parts of bottles for cutting leaves from them;
• necks or bottoms for the inflorescences themselves;
• dye.

More complex options can be done by adults. Plastic roses or poppies will decorate not only the playground, but also flower beds.

plastic design for garden

From plastic bottles have an extensive scope. So, if small animals and birds look appropriate in flower beds and playgrounds, then larger-scale animals can be placed in the garden, among trees and shrubs. They will give the garden a unique look and enliven it.

Amazing Garden Sculptures

Representatives of large birds made of plastic look almost alive. With the help of multi-colored paints, you can achieve a stunning realistic effect. To make them, you just need to master the technique of cutting feathers from the sides of bottles and prepare a frame on which they will be fixed.

Very impressive in the garden will look:

In the garden, you can place sculptures not only of birds, but also animals of a large enough size so that they do not get lost against the backdrop of tall trees.

Among the greenery, a bright spot will be a white sheep, which is quite easy to make if there are bottles of 2 liters and several 1.5 liters lying around in the pantry:

1. Cut off the necks of two 2 liter bottles and put them on top of each other - this will be an elongated head. From the third bottle, cut out long ears, roll them up a little with a tube and attach to the head in the appropriate places with wire (or glue). You can draw eyes or glue two plugs.
2. For the body, insert the whole neck into the bottle cut off from the top. Make 3 more such blanks and attach them to the first on the sides and top, thus giving the lamb the desired “waist” volume.
3. A whole two-liter bottle will serve as a neck, which should be fixed on the body at an angle of about 120 degrees so that the cork is on top.
4. To the neck (on the cork) set the head.
5. For legs, cut off the top of a two-liter bottle and insert a whole bottle of a smaller volume (1.5 liters) into it. Make three more such blanks and attach the legs to the body with the wide part up.
6. From the cut bottoms of two-liter bottles, make a fleece, fastening them together, and put on the body. Under the belly, tie the edges of the fur coat.
7. Paint the sheep with white paint and draw black eyes.

Bird care

Plastic bottles can be used not only for decorative purposes, but also for the benefit of the garden. After all, it is always inhabited by the summer resident's little helpers - a variety of birds that collect pests from trees. In the warm summer, they have something to eat, but in winter it becomes more difficult to get food. That's when the feeders hung around the garden come in handy. And if you involve children in the process, you get a double benefit: for children - an interesting activity and pleasure, and for birds - a cozy house with grains.

The simplest can be made from large 5 liter plastic bottles by simply cutting large arch-shaped holes on both sides.

So that the birds do not injure their paws on the sharp edges of the bottle, they must first be melted or pasted over with electrical tape.

For those who rarely visit their summer cottage in winter, a feeder that fills automatically is useful.

You can make it from a bottle and two wooden spoons:

• make two holes in the bottle opposite each other, while the second should be slightly lower;
• unfold the bottle and repeat the procedure on the reverse side;
• insert spoons into the holes crosswise.

After the bottle is filled with food, it will be poured through the holes into the spoons as they are empty.

A cozy place to relax from improvised means

Not only birds, but also the owners themselves should have their own secluded corner among the greenery, where on warm summer evenings you can enjoy a cup of tea, inhaling the aromas of nature. Many prefer to put in the garden. They are very beautiful, you can’t argue with that, but they require certain financial investments. But from plastic it is cheap and cheerful to make not only a recreation area, but also to completely equip it.

Alcove? Easily!

Arbor - one of the largest crafts for giving from plastic bottles. But a plastic gazebo has two big advantages:

• it is easy to assemble;
• will last more than one year without damage to the material.

Perhaps the only drawback of the building is the presence of a large number of bottles that need to be stored somewhere during the collection process.

What the gazebo will look like depends only on the desire of the owner, and, accordingly, on the availability of “building materials”:

Practical curtains in the gazebo

In summer pavilions there is a lot of fresh air, but, unfortunately, also dust. Ordinary tulle requires frequent washing, while a plastic curtain does not collect as much dust, and you can “wash” it without even removing it - just pour it over with water from a hose (of course, if such a curtain does not hang in the house).

For dreamy and romantic hostesses, delicate curtains made from the bottoms of plastic bottles, strung on a base, are suitable.

Energetic people who love bright colors are more suitable for cork curtains, assembled according to the same principle.

garden furniture

A table, ottoman, armchair and even a sofa in the gazebo can also be made from plastic bottles. The old one from the house is also quite suitable for outdoor recreation, but, like the curtains, it will eventually become a collection of dust. In addition, it is quite difficult to take a wooden sofa outside, because such furniture is rather bulky and heavy. But rearranging a plastic chair is not difficult.

It is not difficult to assemble furniture - you just need to put the bottles tightly and connect them with adhesive tape, giving the desired shape. For ottomans, knit or sew a cape - from the outside, no one will guess what they are actually made of.

Leatherette covers are more suitable for a sofa.

Unbreakable garden chandeliers

If you plan an evening tea party, you should definitely spend it in the gazebo. To ennoble the light bulb, you can cut the bottle into two parts and make a simple ceiling lamp from the upper half and paint it or paste over it with colored thread.

In plastic chandeliers, it is better to use economical light bulbs - they do not heat up so much and will not melt the material.

In more complex versions, chandeliers are assembled from fragments of leaves or flowers cut from multi-colored bottles.

Garden supplies for gardening

In order for the summer cottage to look beautiful and tidy, it is necessary to take care of it all the time - weed weeds, collect fallen leaves and small debris. This will require tools. Of course, it will not work to make a chopper or a rake out of plastic, but simpler specimens are quite possible.

Craftsmen have long known how to use plastic bottles for their own benefit and savings for the family budget. After all, if the scoop suddenly breaks, you no longer have to run to the store for a new one. From household waste that is in every home, you get a lot of useful things at no extra cost:

garden care

From plastic bottles you can make useful things not only for the garden, but also for the garden. These can be both small crafts in the form of, and larger structures such as greenhouses.

Greenhouses for seedlings

Most summer residents grow seedlings of garden crops on their own. Some do it in apartment conditions, but better seedlings are obtained from greenhouses - there is enough heat and light.

You can no longer talk about the cost, but as for durability, plastic bottles will certainly last longer than film shelters or glass structures.

To increase the service life of plastic bottle greenhouses, it is advisable to put them on the foundation, and use a metal profile for the frame.

The simplest version of the greenhouse involves the construction of walls from whole bottles that are put on top of each other.

It will take a little longer to tinker with the greenhouse of the plates, but it will turn out to be warmer. In this case, even parts must be cut out of the bottles and fastened (sewn) together in the form of a canvas. From the finished canvases, mount a greenhouse.

Watering "systems"

For gardeners, watering is no less a pressing issue than the presence of a greenhouse. Instead of ready-made watering systems in the garden, you can use. They must either be suspended above the bush, having previously made holes in the lower part, or dug into the ground.

In addition, the bottle makes a good sprinkler - you just need to make small holes in it and connect it to a watering hose.

Getting rid of pests

A plastic bottle repeller will help drive the summer resident's worst enemy from the site -. He not only plows the beds, digging his tunnels, but also damages the root system of plants in the course of action, depriving gardeners of the future harvest.

If you cut the side walls in the bottle, bend them and put the container on a steel bar, with gusts of wind the bottle will spin and make noise. The sound through the rod will go into the ground and deprive the mole of the desire to manage in this noisy place.

The list of what you can make from a plastic bottle with your own hands is quite long. These are just a few crafts that make life easier for summer residents. Agree - it is better to get the maximum benefit from bottles than to pollute the environment. Take care of nature and work with pleasure!

21 ideas for using plastic bottles - video

Helpful Hints

These flowers can decorate gifts, rooms and/or postcards. Not only do they look beautiful, but they will forever "blossom".

And since plastic bottles are used in the manufacture, you are also helping nature - plastic products can decompose 450 - 1000 years. To date, about 90% of all plastic bottles are not recycled and we want to change that.

Making beauty out of garbage beautiful and noble in relation to our planet. We offer you several color options made from plastic bottles.

Flowers from a plastic bottle. Option 1.

You will need:

Plastic bottles

Scissors

Lighter or candle

Pliers or tweezers

Tip: try to work indoors with good ventilation, on a balcony or outdoors. If you decide to make plastic flowers at home, then open the windows and leave them open during and, for some time, after work.

1. You can use the center, bottom and/or top of a plastic bottle.

First you need to draw a template for your flower and cut it out.

3. All flower petals need to be bent in one direction.

4. Get your lighter ready. Take the flower with pliers and bring it to the flame. As the flower begins to heat up, its petals will begin to deform.

Be careful not to overdo it with heat, otherwise you will spoil the flower.

One by one, form all the petals.

5. It is worth doing several of these blanks.

6. You have semi-finished products ready. Now they need to be connected together in the middle. Prepare 2-3 blanks. The connection can be made using the same heat.

You can also pre-make two holes in the middle of the blanks and sew them together, attaching a decorative button on top in advance.

Flower from a plastic bottle. Option 2.

1. You need to make 7 blanks, but each should be smaller than the previous one. To make them, first draw 7 patterns (see picture).

2. Trace the templates on the pre-prepared parts of the plastic bottles and cut out the quatrefoils.

3. In the middle of each workpiece, you need to make a small hole with an awl.

4. Now each blank needs to be melted over the fire. Use a lighter or a candle and, as in the first example, start heating the workpiece, while bending the petals up in turn.

5. Prepare a green plastic bottle to make a corolla of sepals. Make a whisk, like the previous parts, i.e. melt each petal a little and make a hole in the middle.

6. The flower stem with leaves is also made from a green bottle and wire. From the central part of the bottle you need to cut a spiral. Its width should be about 1 cm.

7. Prepare the wire. It must be wrapped with a spiral cut from a bottle. It is worth noting that when winding, you need to heat the spiral over the flame.

9. Press the beaters firmly against each other to release the end of the wire, which in turn needs to be bent into a loop.

10. Prepare a leaf stencil from construction paper and use it to cut out the leaves from a green plastic bottle. Like the rest of the details, the leaves need to be melted and twisted a little (see picture).

Flower from plastic bottles. Option 3.

You will need:

Plastic bottles

Scissors

Spray paint cans

1. Prepare paints of two colors. With one can, paint the entire bottle, and with the other, draw several different stripes.

2. When the paint is dry, cut each bottle into 2 pieces (you can choose any size).

3. Start cutting out the petals. To do this, you need to make cuts on each part of the plastic bottle. Do this so that you get stripes resembling petals.

Plastic bottles. Flowers. Master Class. Option 4.

You will need:

Plastic bottles

Stationery knife

Bead

1. Prepare plastic bottles and cut off the bottom of each of them.

2. Hold the tips of the petals over the candle for a more realistic look.

3. Choose a paint color, like orange, and paint the flower. You can also color the tips of the petals by applying a thin green line.

4. Heat the dot in the middle and glue the twig to it.

5. Use green paint to color the small flower.

6. For beauty, you can attach a bead to the center of the flower.

7. Now you can connect all the details.

How to make flowers from plastic bottles. Option 5.

You will need:

Plastic bottles

Markers

Scissors

Decorations for flowers

Glue (preferably superglue)

Baking tray

Oven

1. Wash and dry the plastic bottle.

2. Cut off the bottom of the bottle with scissors. Feel free to experiment with the shape, but you should still end up with a flower-like shape.

3. Make sure the room is well ventilated. Prepare an old baking sheet and place the bottoms of plastic bottles on it.

Turn on the oven and bring the temperature inside to about 200 degrees. At this temperature, you need to hold a baking sheet with plastic flowers for about 10 minutes.

4. Remove the tray and let the molds cool. Remove them and start decorating to taste. You can use markers, or glue beads in the middle of the flower.

How to make a flower from a plastic bottle. Option 6.

You will need:

Plastic bottles

Stationery knife

Scissors

Acrylic paint and brush

Glue (glue gun is better)

Drill (for holes)

Buttons

Connecting rings

Candle, lighter or heat gun

baking sheet

Oven

Pliers

1. Cut off the bottom of the plastic bottle to get a flower-like shape.

2. With an awl, make 2 holes in each "flower" - the holes should be on opposite sides, on the edge of each petal. With the help of these holes it will be possible to connect all the flowers with rings.

3. Place the blanks on a baking sheet. While holding the flower with tweezers, start heating the flower with a flame or heat gun. Do it carefully and don't overdo it. It is also worth remembering about the safety and ventilation of the room.

The flower petals will begin to bend during heating, so stop heating when the petals are in the shape you want.

4. Start painting flowers with acrylics. Next, let the paint dry. It is not necessary to paint on both sides.

5. Make two holes in the middle of each flower to sew on buttons.

When making flowers from plastic bottles, you can think not only about the size of the petals and their size, but also about the volume. This is especially important if large flowers are being considered.

In this case, you will need more plastic bottles - one for each petal, but you will get very interesting flowers. For smaller flower petals, half a bottle can be used.

Bulk Color Materials

• plastic bottles of the same color (if we do not plan to color the petals);
• foam or wooden circle - the basis to which the petals will be attached;
• tin can or plastic bottle - for the middle of the flower;
• foam ball, cork - also for the middle of the flower;
• a stable rod or a thin tube (metal, plastic, etc.) - for the stem;
• paint - if we plan to paint the petals, stem, middle details.

We make voluminous flowers from plastic bottles

If you picked up beautiful (almost new) bottles with smooth plastic, pure color, you may not want to paint them.

Leave your feedback

Master class on needlework. Clivia from plastic bottles

Relevance

People have long used not only ready-made, natural materials, but also create completely new ones that do not exist in nature. These include plastics.

The group of these materials is perhaps the most common, because it is from plastics that our industry today produces a huge number of different products. They are different in purpose, shape and color.

Products made from plastic bottles are very popular in everyday life and for decorating a home and a garden plot. Plastic bottles have firmly established their positions in our daily life. The life of plastic bottles is not limited to single use, they are capable of more. So that bottles do not litter the environment, I want to show how you can give a second life to plastic bottles. Crafts from plastic bottles amaze with their diversity. A plastic bottle is a second life, which will be much brighter, more diverse than the previous one, and will be the main material when making a bouquet. DIY crafts from plastic bottles will decorate your garden plot, flower garden and will delight your eyes.

Plastic bottles from various drinks are mostly green or transparent. Products made from them are original, light and modern. There is no limit to imagination and creativity.

Work on the manufacture of products from plastic bottles contributes to the development of the muscles of the hands, improves the eye, consolidates labor skills and skills acquired when working with other materials. This is due to the typical nature of work operations that are characteristic of all types of labor.

The master class is designed for experienced needlewomen and beginners.

Target: to acquaint teachers, educators, parents with this type of creativity, and also show how you can make clivia from plastic bottles and decorate the site with them.

Tasks:

Develop a product manufacturing plan;

Draw attention to this type of arts and crafts.

The leading idea is to decorate the garden plot with flowers from plastic bottles, to give yourself, people joy and good mood.

Plastic bottles are a wonderful material

Cheap and available: you can get it at any time;

You can give the desired shape by processing over a candle;

Products can be painted with alkyd, acrylic spray paints.

This is interesting

Clivia belongs to the Amaryllis family. Clivia is native to the humid subtropical forests of South Africa. These are perennial herbaceous plants with long, rosette leaves. Bright orange, yellow or red clivia flowers are collected in inflorescences. On one inflorescence there can be 2-3 dozen bell-shaped flowers that bloom gradually and last a long time. There are several flower arrows on one plant. Shiny, long, dark green leaves are also very beautiful.

The most beautiful decorative-flowering clivia plant is distinguished by its simple beauty. There is nothing superfluous in this flower. It is beautiful in any period, whether it is flowering or rest. Clivia, blooming, transforms itself and transforms the entire surrounding space with the abundant rich beauty of multiple large and very bright inflorescences. It seems that clivia is a messenger from a country where spring and orange-yellow mood always reign!

Occupational Safety and Health

Hazards at work:

Hand injury with scissors, awl;

Painting the product with paint;

You can get burned while working on a candle.

What to do before starting work:

Put tools and materials in the place provided for them.

What to do while working:

Be attentive to work;

Put the scissors on the right with closed blades and rings forward;

It is better for seniors to cut plastic bottles, as difficulties arise, especially at the very beginning of work (it is difficult to pierce a bottle). Across and along the bottle, the material is cut with scissors quite easily. The most difficult to handle are the bottom and neck of the bottle, here you need to work especially carefully so as not to injure your hand;

Work carefully on the candle so as not to burn yourself;

Work in a well ventilated area.

Tools and materials

Plastic bottles of green (5-6) and transparent color (7),

Scissors;

PVA glue;

Clay Master;

Acrylic, alkyd aerosol paints (red, yellow);

Candle with a diameter of 2 cm;

green insulating tape;

Wire of different diameters;

Large beads of two colors;

Oblong and round beads;

Thick threads (iris).

Stages of making a bouquet of flowers

Core manufacturing

1. Make 7 pistils and 42 stamens from large beads, beads.

To make a pestle, take a thin wire 20-25 cm long, string a green bead on it, bend the wire in half and string 22 large green beads on both ends.

To make stamens, take a thin wire 20-25 cm long, string an oblong bead on it, bend the wire in half and string 19 blue (white) beads on both ends.

2. To collect one flower, you need to take 1 pistil and 6 stamens. Attach the pestle with threads to an aluminum wire 20 cm long, lubricating the wire with PVA glue, and distribute the stamens evenly around it and fasten them with a thread.

flower making

1. For 7 transparent bottles, cut off the top.

2. Cut each part into 6 equal strips to the neck. Cut petals from each strip at the top, rounding the top.

3. Process each petal over a candle, giving a rounded shape to the petals. First work between the petals, and then the edges of each petal, pressing the other petals with your fingers.

I offer you a master class of flowers from plastic bottles. There are a lot of options for such colors on the Internet, there are also master classes, but almost everywhere the nuances and subtleties are not shown. In this topic, we will consider how to make flowers from the bottom of a bottle, this is the easiest version of such flowers. I will try to describe and show the whole process in detail.
I was prompted to this job by a task in the kindergarten - to make crafts from "pokidkovih" (garbage, those that are thrown away) materials.

As it turned out, making such flowers is not very difficult. The material is available and cheap, in fact it is what you throw away. Trying and experimenting will not be expensive. I think older children can make such products on their own or with the help of their parents.

First you need to find as many bottles of different colors as possible. Now I already know that most bottles are produced in a narrow range of colors: bottles are transparent (from water and drinks), blue (mostly pale in different shades), brown (mainly from beer), green (from beer and water) and white (mainly from dairy products). You will need a lot of green bottles, the expense for flower greens is large.

Rarely found, but you can find: yellow bottles (they sell Zhivchik drink) and black ones (he has energy drinks). There are also red bottles (also from energy drinks, but I did not find them). Mineral water is rarely found in bright blue bottles.

First, divide the bottles into parts and consider which piece will be used for what. The bottom will go to the base of the flower, a smooth cylindrical sidewall to fill the flowers.
Do not rush to throw away the conical parts, you can make beautiful bells out of them, as I will show in the next master class.

Cut out the bottom. We make the cuts of the petals as deep as possible.

Now cut out the filling of the flowers. It can be four-leaf, three- or five-leaf flowers. To your taste. It is better to fold several of them, with the petals shifted, then the flower will be more magnificent. The easiest way is to make a cliché out of paper and cut the number of colors according to the template.

Ready for the middle. Why do we cut out a strip (I do it in this flower from white plastic)
and cut it into noodles.

From green plastic we cut out a cup under a flower. There is no need to observe clear geometric shapes, on the contrary, unevenness and unevenness will decorate the flower.

There are blanks for the flower, now you can light a candle and proceed to the most exciting part.

First, we process the edges of the plastic. To do this, we bring the workpiece at the bottom of the candle where the flame is coldest. Carefully melt the edges starting from the recesses. At the same time, the petals are wrapped. If your workpiece is slightly bent, place it above the candle, first higher, in order to understand how the temperature will act, the workpiece will bend and twist. The main thing here is to capture the moment.

Similarly, we melt the flower from the bottom, we start the process from the recesses.
If you want the edges of the flower petals to bend more inward, with a tooth or evenly, bring the already melted petal vertically to the candle flame and wait until it begins to bend.

In order to make the middle of the flower, we first melt the cut strip along the edges well, and then twist it into a tube and melt its edge to fix the shape.
The middles can be made different, I will show examples below.

All parts are melted and the flower is ready for assembly.

We make leaves from green plastic. They can be cut into any shape you like.
We melt the edges of the sheet on the candle (at the bottom of the candle, near the wick itself).

And then we give the sheet a shape - we bend it.
To do this, bring the leaf over the flame of a candle. Remember the part will always bend towards the flame(i.e. down). This process is instant, do not overexpose the sheet, otherwise it will curl.

By the same principle, we melt and bend the inner flowers.
This is what the broken leaves look like.

Please note that green plastic comes in different shades, lighter and darker. Keep this in mind when building and planning.

We will collect flowers on a wire. I have a braided electric wire (one and a half). I bought a double one, removed the general insulation and divided it into two. It is better to take the color of the wire brown or black, this color is better covered with a winding without bald patches.

The next step is to make holes. I have a thin soldering iron, I use it. For these purposes, you can use an awl or a nail, previously heated in a candle flame (we heat at the tip of the flame, where it is the hottest).

We twist the edge of the wire. On the wire we collect the flower in the desired sequence.

We are preparing the stem braid. To do this, we cut the cylindrical part of the bottle in a spiral, approximately into strips of 3-5 mm. To begin with, cut a couple of meters, no more, otherwise it will not be convenient to work, the tape is twisted. We do not cut the strip from the bottle, we will gradually cut it.

Let's start forming the stem.

To begin with, we wind a couple of turns on the wire and lightly melt it on the flame so that it shrinks and fixes.

Then we pull it to the base of the flower, they will tighten it and fix it.

We distribute the leaves, make holes in them at the base and put them on the wire. we wind the spine of the leaf with the same strip and melt it.

This flower will consist of three heads. We wind the wire from the branches onto the main one and rewind it with green tape.

Winding the ribbon around another flower:

This is how it turned out in general.

After all the stems and leaves are decorated, it is engaged in the middle.
Spectacular centers are made of black plastic. They can be made different, for example like this.

The middles can be made of white or transparent plastic.

Under the main flower from the bottom, you can put a base of smooth plastic. To do this, you need to cut the circle with noodles and melt its edges.

Below are examples of how flowers can be made.

Expanded variant:

In order to fix the centers, I use a hot glue gun. You can also simply glue them with super-glue or Dragon-type glue (I haven’t tried it, but they write this on the Internet).

Glue the middle, a couple of colors for example:

There is a double center here.

And this version of the same flower:

Here is our bouquet ready!
Many photos)

Flowers have to be placed somewhere. So that the craft is completely made of garbage, we will also make a vase.
To do this, take a green bottle, cut off the top of it.

We melt the bottle over the candles along the cut edge, and also bend it from all sides. We do as you like, just do not overdo it and do not overheat so that the plastic does not pull.

We make perforation with a soldering iron, which pattern you like)

This is how the vase turned out.

Flowers in a vase. Our kindergarten craft is ready)

In street lighting, the flowers look especially good, the petals gleam and reflect the sun's rays.

The stems and leaves are neat and stylish.

I really enjoyed this job, and I wish you the same!

Thank you for your attention!